CheckPowerRatio

Syntax  

CheckPowerRatio = Kind|Range|Ratio|Operator|FixedPercNoPerm|<FixedPercPerm>

Description

This command tests the power ratio of owned and friendly units against hostile units, within a certain range around the region in selection against an operator and a value. If the test fails, the conditions are not ok and the event doesn't trigger.

Allied units are considered with a 50% coefficient. Fixed units are considered according to FixedPercNoPerm (if not permanently fixed) or FixedPercPerm (otherwise, and optional, will take the FixedPercNoPerm value if not specified) coefficients.

Example  

CheckPowerRatio = LAND|4|300|>=|50|25

Check if we (and our allies) reach a 3 to 1 ratio in land units, within 4 regions from the region in selection. Fixed units are worth either 50% or 25% of their normal power value (both sides).

Parameters

Kind

The kind of units tested.

Either (textually) LAND or NAV.

Planes are LAND units.

Range

Search range in regions

Between 0 (within the region) to 6 (regions around)

Power Ratio

The ratio, in percentage to test against

(20 to 500) (1 vs 5 to 5 vs 1)

example 400 = 4 to 1 ratio (in favor of our units)

Operator

One of <, <=, =, >=, >

Coeff for non permanently fixed units

Value for fixed units (are they considered normally or not)

(0 to 100)

Coeff for permanently fixed units

Value for fixed units (are they considered normally or not)

(0 to 100)